Posts Tagged ‘ColorFabb XT-Copolyester filament


The European filament manufacturer ColorFabb has announced the release of a new special filament using carbon fibers mixed with thermoplastic material that should be as easy to print on most 3D printers. ColorFabb XT CF20 is a copolyester based carbon fiber composite material that is based on the unique Amphora 3D polymer from Eastman Chemical and is reinforced with 20% specially sourced carbon fibers, making it perfect for printing parts which need high stiffness. Combining carbon fibers in filaments material is not a new idea, but ColorFabb has been able to combine a lot of desired properties into 1 new material. Still the company does warn users that due to the abrasive nature of the carbon fibers using this new filament will accelerate the nozzle-wear of brass nozzles, much faster than other standard types of filaments, so they recommend to use nozzles from Stainless steel or hardened copper alloys.

ColorFabb XT-CF20 Carbon filament features:
– Extreme High Flex Modulus (6.2 GPa) / twice as stiff as PLA
– Moderate strain at break (8-10%), so no extreme brittle filament, butt toughness
– High Glass Temp. (Tg = 80C)
– Very high Melt strength
– Very high Melt Viscosity
– Good dimensional accuracy and stability
– Low odor / Styrene Free solution
– Easy processing on many platforms
– High attractive matt black surface

The ColorFabb XT-CF20 special filament with Carbon fibers is already available for pre-order with the first orders expected to start shipping at the end of February. The price of a single spool with a weight of 750 grams in either 1.75mm or 2.85mm diameters is €49.95 EURO or roughly $57 USD. This makes the price of the Carbon fiber reinforced filament from ColorFabb pretty much the same as the one that the USA-based Proto-Pasta sells their Carbon PLA filament. The advantage here is that ColorFabb is based in Europe and if you order from Europe it should come cheaper than if you get the USA product, however although the two filaments seem very similar there are some differences. You should be aware that the Proto-Pasta Carbon PLA filament that we have already tested recently is mixing carbon fibers with PLA, but ColorFabb is using the Amphora 3D polymer instead and thus it has slightly different properties.

The Eastman Amphora 3D polymer is a low-odor, styrene-free choice that is uniquely suited for 3D Printing applications. With Amphora, makers can create items that are more functional, durable, efficient, and attractive. Amphora also complies with certain U.S. Food and Drug Administration (FDA) regulations for food contact applications. The XT-CF20 Carbon filament as well as other ColorFabb XT-Copolyester based filaments are supposed to offer stronger and more detailed parts, offer higher temperature and better chemical resistance as compared to standard PLA filament. The side effect is that you need to use higher temperature of the extruder when printing, 240-260 degrees Celsius are recommended with printing speeds of 40-70 mm/s and the use of a heated build plate is also advised. This means that you need higher temperature, a bit slower printing speed and a heat build plate for best results – things that are not required for PLA-based Carbon fiber reinforced filaments, although the heated build plate may not be required. We are going to be testing ColorFabb XT-Copolyester 3D printer filament soon on out Makerbot Replicator 2 3D printer that does not features a heated build platform, so that we can see how well these filaments will work in our case. ColorFabb recommends that you disable the extruded filament cooling fan of 3D printers that are not equipped with heated build plate when using their XT filaments for the first centimeter and/or using rafts in order to get best results. If the Amphora 3D polymer used in the ColorFabb XT-Copolyester filaments does indeed work well with no warping when not printed on heated build platform we do plan to also try out the new ColorFabb XT-CF20 Carbon Fiber filament when it starts shipping.