Posts Tagged ‘BIQU MicroProbe

The Hurakan 3D printer from BQ (Biqu) is the first more affordable solution to come out on the market with out-of-the-box Klipper firmware installed on it and ready to be used. The printer comes equipped with the BTT Manta M4P+CB1 main control board to ensure enough processing power that is required by the Klipper firmware in order to provide all the extra features that the firmware offers to the users. The Hurakan 3D Printer is an official cooperation with Klipper, and with it BQ is making it easier and more accessible to users that want to try out Klipper without the extra trouble of having to modify and install on an existing 3D printer. The price of the BIQU Hurakan 3D Printer is $399 USD at the moment, making it the most affordable option for a 3D printing solution that comes with Klipper pre-installed and ready to be used out-of-the-box, not that there are currently that many options with Klipper pre-installed apart from the Hurakan and the more expensive FLSUN V400 Delta 3D Printer.

Aside from Klipper support, the Hurakan 3D printer also comes with a nicer-looking dual-color design (blue and black), has automatic levelling built-in thanks to the BIQU MicroProbe sensor, a hotbed with dual heating zones (central and full) to maximize efficiency, a Filament Runout Sensor, Wired and Wireless printer operation and a whole lot of things that can be upgraded or added as features thanks to the nice extensibility of the Klipper firmware. There are a number of “official” upgrade options available from BIQU as well that you might want to explore to further improve and extend the printer’s functionality. I can understand that they were not included by default in order to allow for a lower initial cost of the device and having them as easy to add upgrades allow to offset the additional costs in the future, should you wish to do any upgrades at all that is. More about the upgrades in a bit as there is more to talk about the Hurakan before that…

BIQU Hurakan DIY 3D Printer looks a lot like an upgraded version of the entry-level BIQU B1 3D Printer that comes with a bit of a redesign and some new and interesting features as well as the added Klipper firmware pre-installed out of the box. Since the Klipper firmware has a quite the requirements in terms of processing power, one of the main things that a printer that will run it is to have a powerful-enough processing board such as a Raspberry Pi or the CB1 alternative used by BIQU and that is one of the main things that rises the price of the product over what the same device would cost with a simpler and much less powerful control board. Thanks to the Klipper firmware you get to take advantage of improvements in speed and quality of your prints, and the convenient and functional web-based printing and control interface together with the number of useful extra features make things much more enjoyable. And the printer does come mostly pre-assembled, so just a few components are needed to be attached and some cables connected and you should be quickly ready to start printing.

BIQU Hurakan Specifications:
– 3D Printer Name: BIQU Hurakan
– 3D Printer Dimensions: 480x470x482mm
– Print Head: 1x Bowden type of extruder
– Nozzle Diameter: Standard 0.4mm
– Firmware: Klipper
– Slicing Software Compatibility: Cura/Repetier-Host/Simplify 3D…
– Output Voltage: 24V
– Heated Bed Power: dual-mode 100W/240W
– Maximum Temperature of Nozzle: 260℃
– Suggested Printing Speed: 60mm/s
– Default Speed Limit (Firmware): 180mm/s
– Supported Filaments: PLA/ABS/PETG… (Any material with print temp lower than 260℃ including flexible filament with 95A stillness)
– Build Volume: 220x220x270mm
– Layer Thickness: 0.1mm – 0.3mm
– Printing Accuracy: ±0.05mm
– File Format: G-code
– Printing Method: USB Drive/LAN Controlled
– Rated Power: 280W
– Max Temperature of Heated Bed: 100℃
– Filament Runout Detection: Standard Feature
– Rated Voltage: 100-120V/200-240V, 50/60 Hz

The BIQU Hurakan 3D printer comes with a 220x220x270mm build-volume, heated build plate, Bowden type of extruder with 0.4mm standard nozzle size and max printing temperature of 260 degrees Celsius. The printer is rated at up to 180mm/s printing speed, though the suggested one is just 60mm/s as per the official specs, though the latest manual has the number updated to 120mm/s. It is not the fastest 3D printer out there, but when you have everything up and running you should be able to print pretty fast and even hit the 180 mm/s on some prints… at least in theory, though this is something that needs to be tested. And thanks to the Klipper firmware not only should you be able to print faster, but also have good quality even at higher printing speeds saving you time.

The list of official upgrades for the printer that should help get better results and more functionality you can see on the image above. Interestingly enough the ADXL 345 accelerometer that should be included by default with the printer is listed as an upgrade and BIQU does not clearly state it is included in the package (maybe some printer packages do come without it. Then there is the H2 series of direct-drive extruders as opposed to the Bowden type that the 3D printer comes equipped with, an upgrade that might make it easier to work with more exotic materials including but not limited to abrasive, flexible and higher temperature ones. The Bowden type of extruders are known not to work well especially with flexible materials, so an upgrade of the extruder could be nice, however that would require more knowledge and time as it is not straight forward upgrade. There is also the five and sever inch HDMI displays with touch screen functionality, the dual Z upgrade kit adding a second motor for the Z axis, and an upcoming BIQU camera, though you may be able to use an existing USB-camera that you may already have with your 3D printer.

The official BIQU Hurakan 3D printer product page…
If you want to order the BIQU Hurakan 3D Printer on Amazon…

filmes porno buceta gostosa phim sex